Tips Tricks and More
Here are a few video tutorials with some tips and tricks to help you maintain, diagnose and repair your watercraft.
Also on how to handle and install our PVC graphics.
New segments have been added for doing wraps and applying graphics on snowmobiles.
The best 34 minutes you could spend before applying your new grahics, is to watch the first video on this page, just below this text. I'll show you how how I do it, up close, in HD.
New FX Nytro hood wrapping tutorial
TIPS ON FIXING AND DRESSING UP YOUR SKI
Sea-Doo tip on waterproofing a new seat cover video #1
Sea-Doo R&R motor mounts and alignment video #2
Sea-Doo starter rebuild with the good folks at PoCo Auto Electric.video #3
Sea-Doo greasing the drive shaft with guest mechanic Chester. video #4
Sea-Doo How to diagnose wear ring with guest mechanic Chester. video #5
How to replace wear ring in sea-doo jet ski in just 5 minutes. video #6
Changing pump oil in vintage sea-doo part 1of 2 video #7
Changing pump oil in vintage sea-doo part 2 of 2 video #8
HOW TO WORK WITH PVC GRAPHICS
Installing registration number on a radius panel video #9
RIDING TRIPS WITH FRIENDS
Riding with friends from CANADIANPWC.COM video #10
" Give Me Air" A solo adventure video #11
Jet Skiing compilation "The Water Dogs" video #12
TNY HOOD WRAP INSTALLATION PROCESS 1~9
I have been short on time yet want to help out by posting these unedited video clip tutorials on wrapping the hood of the Yamaha Apex model and others. These will be edited into higher quality DVD formats as time permits.
TNY WRAP video #13 part-1 of 9
TNY WRAP video #14 part-2
TNY WRAP video #15 part-3
TNY WRAP video #16 part-4
TNY WRAP video #17 part-5
TNY WRAP video #18 part-6
TNY WRAP video #19 part-7
TNY WRAP video #20 part-8
TNY WRAP video #21part 9 of 9
'Louie's Inferno' tank wrap tutorial 3 part tutorial
video #22 part-1
video #23 part-2
video #24 part-3 of 3
'GOT B00ST?' tank wrap tutorial 4 part tutorial
video #25 part-1
video #26 part-2
video #27 part-3
video #28 part-4 of 4
'AJ's' engine covers gfx tutorial 2 part tutorial
video #29 part-1
video #30 part-2
'AJ's' Hood Wrap tutorial 4 part tutorial
video #31 part-1
video #32 part-2
video #33 part-3
video #34 part-4
'AJ's?' tank wrap tutorial 5 part tutorial
video #35 part-1
video #36 part-2
video #37 part-3
video #38 part-4
video #39 part-5 of 5
'Louie's Inferno' hood wrap tutorial 3 part tutorial
video #40 part-1
video #41 part-2
video #42 part-3 of 3
Applying engine cover gfx on FX Nytro 2 part tutorial
video #43 part-1
video #44 part-2
Applying tank consol cover gfx on FX Nytro 2 part tutorial
video #45 part-1
video #46 part-2
Applying Apex engine cover gfx 2 part tutorial
video #47 part-1
Applying Polaris hood gfx 1 part tutorial
video #49 part-1
XP HydroTurf seat cover installation
R&R blown supercharger sea-doo rxt 215
part 2, and back on the water.
Instaling UMI Racing steering on sea-doo XP
part 2 and completion.
Fresh SBT top end will give your ski a lot of fresh power
When to ride?
A Blast from the Past!
Came across some old footage back in the day when I was doing custom fiberglass sculptures. This snipet is of the Phillidelphia Phillie's Phanatic mascot for the stadium.